Operating Instructions

SENSE MCE IBC Operating Instruction
Page 34 of 46 Release Rev. D, 2020-12-15
© MYNXG Product GmbH, 2020. All rights reserved
5.3.4 LTE and WCDMA Transmit Power
The conducted transmit power is the maximum power that the module, tested at the antenna
port, can transmit. The 3GPP protocol requires different transmit power levels for each power
class. Table 5 lists the required and the tested values of the transmit power.
Table 5: Conducted Tx power specifications.
Mode
Band
3GPP
Requirement
(dBm)
Tx Power (dBm)
Typical
Note
WCDMA
Band II
24+1.7 / -3.7
23.5±1
-
Band IV
24+1.7 / -3.7
23.5±1
-
Band V
24+1.7 / -3.7
23.5±1
-
LTE FDD
Band 2
23±2.7
23±1
10MHz Bandwidth, 1 RB
Band 4
23±2.7
23±1
10MHz Bandwidth, 1 RB
Band 5
23±2.7
23±1
10MHz Bandwidth, 1 RB
Band 12
23±2.7
23±1
10MHz Bandwidth, 1 RB
Band 13
23±2.7
23±1
10MHz Bandwidth, 1 RB
Band 17
23±2.7
23±1
10MHz Bandwidth, 1 RB
Band 66
23±2.7 / -3.2
23±1
10MHz Bandwidth, 1 RB
Band 71
23±2.7
23±1
10MHz Bandwidth, 1 RB