Users Manual

SENSE MCE IBC Operating Instruction

Rev. D, 2020-12-15 Release Page 25 of 46

3 Installation

IMPORTAN T NOTICE

The Sense MCE IBC shall not be installed on a place where it might be

penetrated by mechanical stress above 7 J.

CAUTION

Ensure that the location where the device is placed meets the specified

environmental conditions concerning temperature and humidity. not

cover the device and keep at least 20cm space around for air circulation.

CAUTION

The cable of the pre-assembled piezo is already connected to the Sense

MCE IBC. Ensure that the cable is handled carefully in order to prevent

any kind of damage.

IMPORTAN T N OTICE

▪ Do not place the device close to high power / high frequency cable

tacks that might have an influence on the device – minimum distance

50cm.

▪ Do not place the device below ground level or inside rooms with

concrete walls (bunker like environments).

3.1 Delivery and Unpacking

The Sense MCE IBC is delivered in a carton enclosure which also includes the (optional)

(mounting plate. The device is already pre-assembled and personalized, i.e. ready for use after

waking up.

IMPORTAN T NOTICE

Please check packaging and delivery immediately after receipt regarding

damages and completeness. Do not throw away the packaging – it can

be used for storage or sending the device back to MYNXG in case of

service needed.

CAUTION

Devices on which moisture has developed because of temperature

changes must not be used unless they have been completely dried.

CAUTION

The SENSE MCE IBC shall not be used when damages or technical

defects are visible or recognized.