User's Manual

5
55
5
20-10026 Rev 1.0.0
1309 Beacon Street, Suite 300
Brookline, MA 02446
mScan™ Device
LED light indicator: used to indicate device operating status while device is on. It will
change color depending on operating status. It will blink or display a steady light for depending
on the specific operation.
Charge indication LED light: used to indicate device charging status while device is in sleep
mode (not turned on). When it blinks red slowly, it means the device is being charged. When it
blinks green slowly, it means the device is at least 80% charged and ready for use.
Charge port: used to connect to a charge source via USB C cable for charging the device.
Electrode sensor ejection button. Pushing the button will eject the electrode sensor.
Power on/off buttons: Press both buttons together to turn on the device; press both
buttons again to turn off the device.
5
2
3
4
2
3
1
5
1
4