Operation Manual

MyotonPRO User Manual
Page 100 of 108
Functions of the Values of vertical axis of graphs section:
 Automatic values – determines the default limit values for the vertical axis of the graphs: the
upper limit value = 2 x mean value, lower limit value = 0;
 Min – determines the lower limit value for the vertical axis of the graphs if the notation
Automatic values is deactivated;
 Max – determines the upper limit value for the vertical axis of the graphs if the notation
Automatic values is deactivated.
Functions of the Measuring default values section:
 Tap time (ms) – determines the default value for the Tap time in the Pattern composer
window;
 Delay (s) – determines the Delay value that will be sent to the Device when uploading the
Measurement series;
 Interval (s) – determines the default value of the Tap time in the Pattern composer window;
 F, D, S, C, R – determines which parameters of the measurement results will be displayed in
the Device.
Functions of the Report settings section:
 Company name – determines the name of the organisation of the user of the Device that will
be displayed on the reports of the measuring results;
 Show description on report – before generating the reports, this opens the Description
window to enter a comment on the reports of the measurement results.
4.2.9 Deleted items window
You can restore the data deleted in the Software in the Deleted items window of the Settings
menu: