Operation Manual

MyotonPRO User Manual

Page 26 of 108

3.2 Preparations for use

This chapter describes the procedure for the application of the Device.

Firstly the software has to be installed. While installing the Software, follow the installation

instructions displayed on the screen. The Software is compatible with Windows XP and later

versions of Windows operating systems. The Software is not freeware and the downloading

and use thereof is only permitted for the institutions, companies or individuals who have

bought or rented the Device.

The Device is used with Software

versions:

1. MyotonPRO (ver 0.0.3 or newer) – for human medicine related applications;

2. MyotonVET (ver 0.0.3 or newer) – for veterinary medicine.

Available Software updates and other product-related materials can be downloaded from:

https://www.myoton.com/download

The basic functions of the Software are:

 Setting-up of the Device – see chapter 4.2.5

 Preparation of Measurement set – see chapter 3.4

 Uploading the Measurement set to the Device – see chapter 3.4.3

 Performance of test measurements – see chapter 3.3

 Downloading the Measurement results from the Device – see chapter 3.6.1

 Compilation of reports of the measurement results – see chapter 3.6.2 – 3.6.7

 Export of measurement results for external analysis – see chapter 3.6.8

3.2.1 Charging the battery

The Device is provided with an internal Lithium Polymer battery (see Appendix 3), which at the

time of delivery has been charged to approx. 40%. Before using the Device you must fully

charge the battery. The charging time for an empty battery is up to 5 hours.

If the battery voltage is < 10% (< 3.6 V), charge it before performing the measurements to at

least 10% of capacity. The maximum voltage of a fully charged (100%) battery is 4.2 V. The

battery level of charging (percentage) can be seen on the main screen of the Device.

There are 2 methods by which to charge the battery:

a) with a USB cable from the computer,

b) from the mains power supply with an adapter.

The difference between the software of MyotonPRO and MyotonVET relate to the Objects Latin names and Subjects related

information fields. Otherwise, the Software is identical.