Operation Manual

MyotonPRO User Manual
Page 27 of 108
During charging or use, the Device may become warm. To obtain the temperature of the
Device, press Menu and then System info. If the temperature of the Device is over 50 °C, turn
off the Device and wait until it cools down. If you do not follow these instructions, the battery
or Device may be damaged.
Only perform the charging of the Device battery from mains power supply with the
MyotonPRO product kit adapter and only charge from the computer with the cable that has
the respective USB type A and Micro USB type B plug. When charging the battery abroad, you
may need to use a corresponding regional adapter. Remove the adapter from the mains
power supply if not in use. If necessary, consult your sales representative or the
manufacturer.
Never let the battery discharge completely. If the battery is not being used for extensive
periods of time, it must be fully charged every 6 months.
Description
Photo
1. Connect the Micro USB (type B) plug
to the Device.
a) To charge the battery from the
computer, connect the USB
cable to the computer, ensuring
that the computer is turned on
for the duration of charging.
b) To charge the battery from the
adapter, connect the USB cable
to the adapter and plug the
adapter into the mains power
supply.
2. Charging is in progress when the LED
on the lower part of the ON/NEXT
button is red and there is a yellow
lightning mark over the battery icon
on the screen of the Device.
Charging is complete when the LED
on the lower part of the ON/NEXT
button becomes green.