Operation Manual

MyotonPRO User Manual
Page 30 of 108
5. To confirm and start using the Bluetooth
connection, click on the Apply button.
Checking the connection
When the connection is established between the Device and the computer, check if it works
by doing the following:
Description
Screen shot
1. Open the Software and click on
Download button on the main toolbar.
The Device must be turned on and
showing the main screen.
2. The connection has been successfully
established when the Device window
opens that displays the serial number of
the connected Device.
While the connection is being
established a two arrow symbol appears
for short period in the top left corner of
the Device screen.
If you do not need to download
previously taken measurements, close
the window by clicking Cancel otherwise
click Download.