Operation Manual

MyotonPRO User Manual
Page 34 of 108
4. Move the device towards the measurement surface until
the measurement position is achieved and indicated by
green light being illuminated.
Keep the device steady in the acceptable range of the
required measurement position. There is an in-built Delay
(1sec) before the device automatically performs the
measurement. Information regarding the measurement
position is given in chapter 2.2.4.
5.1 After the measurement, the results are displayed. For a
quick evaluation of the Tissue oscillation, check the
acceleration curve by clicking the Graph icon on the top
right of the screen.
Observation of the acceleration graph allows for evaluation
of the natural oscillation of the tissue (see chapter 2.3).
5.2 To navigate back, click on Results icon on the top right of
the screen.
6. To repeat the measurement, click on Re-Measure.