Operation Manual

MyotonPRO User Manual
Page 36 of 108
3.3.2 Activation of Test mode in Software
Description
Screen shot
1. Open the Software, connect the Device
to the computer (see chapter 3.2.2) and
ensure the Device is showing the main
screen. In the Software click on the
Settings icon on the main toolbar.
2. In the Settings menu scroll down to and
click on the Test measuring button.
Menu instructions of the Test measuring
window are given in chapter 4.2.6.
3. In the Test measuring window, click on
Test and perform a test measurement
with the Device
23
. An acceleration graph
is displayed on the computer screen.
This can be evaluated based on the
chapter 2.3.
23
See chapter 3.3.1, points 3 to 5.