Operation Manual

MyotonPRO User Manual
Page 47 of 108
12.4 To deselect any selected groups please
highlight on the right hand side and then
click the left arrow button.
12.5 In order to delete any available groups
please highlight the required group on the
Available group side and press Delete
button in the middle section of the
window.
13. To compose the next Pattern, click Save
and then New.
14. To save the last Pattern and close the
window, click OK.
3.4.3 Uploading the Measurement Set
To perform the measurements, the Measurement Set prepared in Software has to be uploaded
to the Device. The Measurement Set consists of Subjects and Patterns (and Measurement
profiles). The creating and uploading of the Measurement Set is performed in the Software
window Upload Preparation (chapter 4.2.2).
To upload the Measuring Set to the Device, perform the following actions in Software: