Operation Manual

MyotonPRO User Manual
Page 48 of 108
Description
Screen shot
1. Establish the connection between the
computer and the Device (see chapter 3.2.2).
Open Software and click the Upload
Preparation icon in the main toolbar.
2. In the section Subject, select the Subject’s
group if the measured Subject(s) are
grouped
30
in advance (see chapter 3.4.1,
point 9). Using the Subject’s groups, it is
possible to filter Subjects within the group.
3. Select the Subjects for the Measurement Set
with either a double click or by highlighting
the Subject’s name and clicking on arrow
right button above Subject info.
It is possible to select a maximum of 50
Subjects for the Measurement Set.
4. In the Patterns section, select the Pattern
group if the Patterns are grouped
31
in
advance (see chapter 3.4.2, point 12). Using
the Pattern’s groups, it is possible to filter
Patterns within the group.
30
Subjects can be added to or removed from groups also at a later stage. This can be done in Subject group window by the
mouse right-click on the Subject’s name and choosing Change groups.
31
Patterns can be added to or removed from groups also at a later stage. This can be done in Pattern group window by the
mouse right-click on the Pattern’s name and choosing Change groups.