Operation Manual

MyotonPRO User Manual
Page 51 of 108
3. Click on the name of the Pattern you are going to use for the
measurement (or on the ON/NEXT button of the Device if you
start using the first Pattern in the list).
4. Click on Perform new measurement (or on the ON/NEXT
button of the Device).
5. The Measuring screen opens, where the instructions to the
Operator are displayed: Move into position!
Place the Probe perpendicular to the skin surface above the
measurement point on the Object. Move the Device towards
the skin surface until the acceptable Measurement position
33
is achieved and indicated by green light being illuminated.
33
The information regarding measuring position is given in chapter 2.2.4, point 4.