Operation Manual

MyotonPRO User Manual
Page 53 of 108
8.2 To measure the next Measurement profile, click on Next (or
on the ON/NEXT button of the Device).
By clicking Next the Measurements results will be saved and
can not be replaced. However the Measurement series can be
repeated (see point 9).
8.3 To finish the Pattern, click Save (or on the ON/NEXT button of
the Device).
By clicking Save the measurement results will be saved and
can not be replaced. However the Measurement series can be
repeated (see point 9).
9. If there are more than one Subject or Pattern to be measured,
make the appropriate selection until all measurements have
been conducted:
 Next Pattern – to use the next Pattern of the measured
Subject;
 Next Subject – to use the first Pattern of the next Subject;
 Repeat Pattern – to repeat the used Pattern;
 Finish – to finish the measurements;
 Subjects – the list of Subjects;
 Patterns – the list of Patterns.
10. To finish the measurements, click on Finish (or on the
ON/NEXT button of the Device).