Operation Manual

MyotonPRO User Manual
Page 73 of 108
4. Activate one row of the Measurement result in
the Results tab, the acceleration graph of
which you want to view.
5.1 In the Results window, click on the Accel.Graph
button, after which the window of the
acceleration graph will be displayed on the PC
screen.
5.2 If you want to export the values of the row
signal of the measurement into CSV file
format, activate the Export checkbox before
clicking on the Accel.Graph button above it.
COMMENT If in the Results tab, where the column entitled Accel.Graph is marked with the indication ”+“, the
measurement results are shown for which the acceleration graph has been stored.
3.6.7 Creating the Estimation graph
The Estimation graph shows the differences in the measurement results for the two parameters
frequency (F) and decrement (D) for the Object in both a relaxed and contracted state. It is
possible to display on the graph the measurement results of both sides of the body for the same
Object. The Estimation graph enables you to evaluate the level of the working capacity of a
muscle. As a result of contraction, the value F should increase and the elasticity should improve
(as well as the value of D decrease) in the case of a normal muscle. The bigger the difference
between the measurement results for the F and D of the muscle in its contracted and relaxed
states, the better is the working capacity of the muscle. The measurement results are displayed in
Software Estimation graph window: