Operation Manual

MyotonPRO User Manual
Page 86 of 108
4.1.3 System information of the device
To display the system information of the Device, perform the following actions:
Description of the action
Screen shot
1. Open the initial screen of the Device and click on the Menu
button.
2. In the Menu window, click on the System info button.
3. In the System Information window, the following information is
displayed about the Device:
 Serial number;
 Manufactured - manufacturing date;
 Calibrated - calibration date;
 Hardware rev - Hardware version;
 Application FW - firmware version of the application;
 Myometer FW - firmware version of the measurement
processor;
 Bluetooth – physical address of the Bluetooth connection;
 Battery – the current voltage (V) of the battery.
 Device temp – the current temperature of the Device.