Operation Manual

MyotonPRO User Manual
Page 88 of 108
4.1.5 Probe replacement
The Probe of the Device may be replaced, if it is necessary to do either of the following:
 Sterilization of the Probe (e.g. if tissues with mucous membrane are to be measured),
 Installation of a longer
37
Probe (e.g. if hard-to-access tissues are to be measured).
To replace the Probe, perform the following actions:
Description of the action
Screen shot
1. Open the initial screen of the Device and click on the Menu
button.
2. In the Menu window, click on the Probe button.
3. Pull the Probe out of the Device.
4. Insert a new Probe into the Device.
5. On the Probe replacement window of the Device, click on the
Done button.
37
To purchase a longer Probe, contact the sales representative or the manufacturer.