Operation Manual

MyotonPRO User Manual
Page 98 of 108
 Spectrum max (Hz) – changing the upper limit value for the Y-axis of the Spectrum graph;
 Tap time – changing the impulse time;
 Delay – changing the time lag preceding the mechanical impulse.
 Test/Cancel – starts/cancels the Test mode in the Device.
4.2.7 Configuration window
The configuration of the Software database settings can be performed in the Configuration
window of the Settings menu:
To open the Configuration window, click in the Settings menu on the button:
Functions of the Database configuration section:
 Database – determines the database file that the MyotonPRO PC Software will use.
COMMENT The default database file in Software is MyotonDB.sdf (stored in the directory: My Computer/
Program Files/ MyotonPRO). In case of need more than one database can be used in the Software
(see chapter 3.8).
Functions of the Log configuration section:
 Application – name and location of the Software functioning log file;
 Data manipulation – name and location of the log file for the events related to the
manipulation of the Software data;
 Data read – name and location of the log file of the events related to the reading of data;
 Device communication – name and location of the log file for the events related to the
communication with the Device.
To confirm the application of the settings, click on the Apply button after the setting changes
have been made.
If the location of log files is described incorrectly, the functioning of the MyotonPRO PC
software can be adversely affected.