D210 | En Technical Specification & Warranty
Supported connections Your new myPOS D210 (D210 in short) requires an internet connection in order to work properly. The internet connection can be established via Bluetooth, Wi-Fi and GPRS (SIM card). Simply connect your myPOS to the internet using your mobile phone (via Bluetooth or personal hotspot), a wireless router or GPRS connection. For further information on how to establish a connection, please refer to our Quick User Guide, available at .
Certifications & EMV EC Declaration of conformity: The manufacturer PAX Technology Limited, China, declares that this product is compatible with the essential and other requirements of EC Directives R&TTE 1999/5/CE and related EC Directives and carries the CE mark accordingly a copy of the EC Declaration of conformity is available at www.mypos.eu/compliance.
D210 specification Processor Printer 32-bit secure processor, 96MHz Thermal printer, speed:18 lines per second; Paper roll width / diameter: 58mm / 38mm Memory 64MB (32MB Flash, 32MB SDRAM) Voltage Keypad 10 numeric keys & 5 function keys Display 2.4 inch TFT LCD Communication Bluetooth / Wi-Fi / GPRS Peripheral Ports 1 x Multi-Single mini HDMI port Magnetic card reader Triple track (Track1 / 2 / 3) Bidirectional Smart Card Reader EMV L1 & L2 certified Contactless Card Reader 13.
Safety Instructions General Safety Information џUse only the provided AC adapter. There is a risk of explosion and fire and device damage if other adapters are used. џNever expose your device to extreme temperatures. There is a risk of explosion and fire. џSwitch off the device immediately if it starts to emit smoke, unusual odors or noises. If you continue to use the device under such circumstances, there is a risk of fire and electric shock. Have the device repaired by qualified personnel service.
џOnly use the supplied charger. џDo not store below -20°C or above 70°C. џDo not apply pressure to the battery. џDo not disassemble, puncture or damage the battery. Maintenance џDo not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. џDo not use compressed air to clean the unit or its components or to remove dust. џMake sure that you do not scratch the touch screen surface. џMake sure that you keep the charging contacts clean.
Let`s get started Overview 1 Turn ON / Turn OFF button 2 Magnetic strip card reader 3 USB slot for recharge cable 7 4 Chip-card reader 5 5 Display 1 6 Keypad 7 Printer 4 2 6 3 Keypad - touch buttons To navigate through your D210 device, the main function buttons are: F1 Opens the Menu screen for choosing Transaction type F2 Opens the Settings screen X Cancels the operation and goes back to the previous screen O Approves the entry and goes to the next screen < Deletes entry 7
Alpha-numeric keyboard If you need to input letters or any special characters on your D210 device, you will need to press the relevant number key button as many times as needed to select the required character. Please find below a specification of all additional characters and how you can select them: Key button Additional characters for each key button 1 1 Q Z . 1 q z .
Charging The terminal displays the Battery Power status as a number of bars. There are a number of factors that can affect the rate of Battery drainage, for example: џLength of time off the charger џTime before sleep mode is activated џTime between transactions Please check the battery status prior to initiating any action on the terminal. Should it indicate 'very low' (no bars) or 'no power' you should recharge the battery. When you turn ON your D210 device for the first time, you need to charge it.
Replacement of myPOS Package with defect: џ Client must not open the POS terminal device and must not try to repair the defect by himself/herself. This will be deemed as a defect caused by Client and iPay International will not be liable for its obligations under the Return Policy.
