Specifications

Linux

If your host is running Linux, you can issue the command /sbin/lspci, which will

return all devices attached to the PCI bus.

Screen image of /sbin/lspci command.

If the output you receive is similar to that above, namely you see the “Network

controller: MYRICOM Inc” entry, the Myrinet/PCI-X NIC has been correctly

detected. The card ID for the Myrinet/PCI-X NIC is 8043, the (rev 04) denotes a

PCIXD NIC, and the (rev 05) denotes a PCIXE NIC. If you see (rev 06) in the

output, the host has detected a PCIXF NIC. You can now proceed to the software

installation.