Owner manual
UP or DOWN Keys
While measuring in any parameter, the or
keys activate
While in CAL mode, the keys step or scroll the displayed value up or
down. A single press steps the display and holding either key scrolls the
value rapidly.
IV. AFTER USING THE ULTRAMETER II
A. Maintenance of the Conductivity Cell
this does not affect the accuracy; leave it alone.
B.
The sensor well must be kept wet with a saline solution. Before replacing
USE
.
V. SPECIFIC RECOMMENDED MEASURING PROCEDURES
NOTE: After sampling high concentration solutions or temperature
extremes, more rinsing may be required. When sampling low conductivity
A.
3. Press or .
4. Take reading. A display of [- - - -] indicates an overrange condition.
B.
drift from trace contaminants or absorption from atmospheric gasses, so










