Owner manual


B. Setting User mode Calibration “Linc”
The Linc function sets or “links” the calibration gain factor of a Standard
Solution to the User solution mode. Once set, the “Linc” will stay intact
with future calibrations unless the Linc has been canceled. For more
information on canceling the User mode Calibration Linc refer to the

            
factor to the User solution mode.
1. Press measurement key desired to be “Linked”, i.e., ,
or .
 II in
Figure 27
 
 
 
3. Press arrow key until
the menu “Linc” appears
 
Figure 28
User
4. Press key. The
instrument will display “SEL”
and the “User
 
Any additional display of KCl,

Figure 29
KCl
User
between the User solution and the
other solution displayed.
  or keys
to select a Standard
Solution to be linked to the
User mode calibration
 
“User” is linked to “KCl”.


6. Press key to accept the setting. Pressing any of the