Owner manual
36
XIX. ACCESSORIES
NOTE: MSDSs are available on the Myron L website for all solutions:
http://www.myronl.com/main/Material_Safety_DS_DL.htm
A.
II has been factory calibrated with the appropriate
standard solutions. Most Myron L conductivity standard solution bottles
±
1.0% of reference
solutions.
1.
The concentrations of these reference solutions are calculated from
recommended standard.
sodium chloride, which represent the three predominant components
approximating fresh natural waters and was developed by the Myron L
measuring both conductivity and TDS in drinking water, ground water,
lakes, streams, etc. 3000 ppm is the recommended standard.
3.
This is especially useful in sea water mix applications, as sodium chloride
is the major salt component. Most Myron L standard solution labels show
14.0 mS is the recommended standard.
Order NACL-14.0
B.
accurate to within
±
C.
D.
.