Manual


  to display the stored memory records.
  repeatedly until you pass the CELL ch location.
The display will show “Auto oFF
4. Press to initiate. “CAL”
will be displayed along with
“15 SEC” or current Auto
 
  or to
change the amount of time
 
time is shown.
6. Press to accept the
 
XV. “USER” MODE CALIBRATION LINC™ FUNCTION
The Linc™ function allows easy calibration when in “User” mode and the
user does not have a user standard solution to calibrate the instrument.
This function will ensure more repeatable and accurate measurements
than many other calibration methods. It is recommended that this

Ultrameter II is used in “User” mode. When Linc is used, the “User”
mode is linked to another standard, i.e., if User and KCl are linked, a KCI
standard solution is used to calibrate the instrument. It is that simple.
A. Calibration of Ultrameter II for use in “User” mode
1. Press or key.
 
 
 II 
 
Figure 25
CAL
Figure 26
CAL