Instruction Manual

VI. OPTIONS & ACCESSORIES

A. OPTIONS ORDERED WITH MONITOR/CONTROLLER

PART # DESCRIPTION

-4A 4-20mA Self-Powered Isolated Output Module (ASII only)

-PA Piezo Electric Alarm (ASII only)

-35BL 3 1/2 Digit Backlit Liquid Crystal Display (ASII only)

-TP Temperature Module 0-200°C, Requires -TP Sensor (ASII only)

-PC Powercord 115 VAC (8 ft. with USA plug and Strain Relief) - NOT for 230 VAC use.

SPECIAL ORDER OPTIONS

-24VA 24 VAC Isolated Power

-24VD 24 VDC Isolated Power

-PTS Front Panel Full Scale Test Switch (ASII only)

-TPA Temperature Module 0-200°C WITH Adjustable Hysteresis, Requires -TP Sensor (ASII only)

B. OPTIONS & ACCESSORIES ORDERED SEPARATELY

PART # DESCRIPTION

4AO 4-20mA Self-Powered Isolated Output Module (ASII only)

PAO Piezo Electric Alarm Only (ASII only)

35BLO 3 1/2 Digit Backlit Liquid Crystal Display (LCD) (ASII only)

TPO Temperature Module 0-200°C, Requires -TP Sensor (ASII only)

TPC Calibration Module (Temperature Module)

PCO Powercord 115 VAC (8 ft. with USA plug and Strain Relief) - NOT for 230 VAC use

SMP50 Surface Mounting Plate for AQUASWITCH I with two (2) 1/4-20 x 3/8 screws

SMP60 Surface Mounting Plate for AQUASWITCH II with two (2) 1/4-20 x 3/8 screws

RA Remote Alarm - RA™ (ASII only)

RAW200 Wire, 200 ft/60 meters, Remote alarm

VR Powersupply, 24 VAC, 20VA. (115 VAC, Indoor use Only)

024-1 24 VAC 1” Solenoid Valve

CS-11 20 Megohm Resistivity Calibration Module (Sensor Substitute) NIST Traceable

CS-14 2 Megohm Resistivity Calibration Module (Sensor Substitute) NIST Traceable

CS-17 20 Kilohm Resistivity Calibration Module (Sensor Substitute) NIST Traceable

CC or CR NIST Certificate without Sensor C = Conductivity/TDS, R = Resistivity

CCS NIST Certificate with Sensor in Standard Solution