Instruction Manual

ManualsBrandsMyron L ManualsToolsPTBT2

4 5

PTBT2

ACCURATE

RELIABLE

SIMPLE

Professional Water Analysis

myronl.com

PACKAGE CONTENTS:

PTBT2 Pocket Tester•

Pen - battery installed

Soaker Cap•

Scoop•

Pocket Clip•

Holster•

Lanyard•

Operating Instructions•

MADE IN USAMADE IN USA

ORIGINAL

EDITED FOR USE

Minimum height 5 mm

pH and Temperature Pen

for use with your mobile device

ULTRAPEN

™

•

 Accuracyof±0.01pH

•

 ProprietarySensorDesign

•

 1,2and3pointcalibration

•

 AutomaticTemperatureCompensation

•

 TemperatureReadout

•

 Waterproof

•

 Poweredby1NTypebattery(included)

•

 MeasurementandCalibrationstoragewith

time,dateandlocation.

•

 Exportstoredmeasurementdataviaemail.

Enabled

ULTRAPEN™

PTBT3

ORP & Temperature

ULTRAPEN™ PTBT4

Free Chlorine Equivalent

(FC

) & Temperature

ULTRAPEN™ PTBT1

Conductivity, TDS, Salinity

& Temperature

Coming soon

Also Available

Available at

Apple App Store

Visi t o ur web s ite :

myronl.com/PTBT2.htm

Summary of content (6 pages)

PAGE 1
ULTRAPEN ™ PTBT2 Enabled pH and Temperature Pen for use with your mobile device ORIGINAL EDITED FOR USE S ACCURATE Minimum height 5 mm S RELIABLE S SIMPLE Available at Apple App Store Professional Water Analysis Accuracy of ±0.01 pH Proprietary Sensor Design 1, 2 and 3 point calibration Automatic Temperature Compensation Temperature Readout Waterproof Powered by 1 N Type battery (included) Measurement and Calibration storage with time, date and location.
PAGE 2
INTRODUCTION Thank you for purchasing the Myron L® ULTRAPEN™ PTBT2 pH Pen. This instrument is designed to be extremely accurate, fast and simple to use in diverse water quality applications. Advanced features include 1, 2 and 3 point calibration; automatic temperature compensation; highly stable microprocessor-based circuitry; waterproof housing; and Mobile Device Application that is user intuitive. The PTBT2 is easy to calibrate and easy to use. Downloading the Mobile Device App 1. 2. 3. 4.
PAGE 3
OPERATING INSTRUCTIONS The following are basic instructions for operating the PTBT2 ULTRAPEN & App. To access a full Operations Manual: 1. Inside the App tap the Preferences button on the Feature Navigation Bar. 2. Select Help from the Settings Menu screen. 3. The browser of your mobile devices will open and link to the Myron L® Company website page where the PTBTx Operations Manual can be accessed. I.
PAGE 4
1. Rinse the pen. If measuring from a container, submerge the pen and swirl it around in FRESH sample solution 3 times. Alternatively, swirl for 30 seconds under a stream or in a body of water. 2. If the Measurement screen is not displayed, tap the Measurement button in the Feature Navigation Bar. The screen will say, “Paired ULTRAPEN is Offline“. 3. Grasp the pen near the pen cap to avoid sample contamination. 4. Remove pen from the rinse solution. 5.
PAGE 5
... Continued from page 3 8. When the LED flashes slowly, swirl the pen around to remove bubbles, keeping the cell submerged. The Calibration screen will display. “Calibrating 7.0 pH ...” 9. When the LED light goes solid ON, the Calibration screen will display “7.0 ph CAL SAVED” along with the before and after calibration values. 10. DONE and CONTINUE Buttons will appear at the bottom of the Calibration Screen. NOTE: Tap the DONE button to end the calibration at this point, or; 11.
PAGE 6
III. pH Sensor Replacement (Follow the instructions that come with your Replacement Sensor.) CAUTION: Only Remove/Replace the pH sensor in a CLEAN and DRY environment! To remove the pH sensor: 1. Remove the soaker cap; make sure the PTBT2 (including the pH sensor) is clean and dry. Loosen the battery tray to allow pressure equalization. 2. Then firmly grasp the pH sensor body and slowly pull the pH sensor out. To install a new pH sensor: 1.