Z-Series Z 3 1 0 C D P l aye r Owner’s manual www.myryad.co.
CONTENTS • • • • • • • • • • Introduction Installation and Safety Accessories Setting up your CD player Rear panel connections Operating your CD player Front panel controls Remote Control Care and handling of compact discs Installing and replacing batteries in the remote control Trouble-shooting guide Specifications 2 2 2 3 4 6 7 7 7 7 INTRODUCTION INSTALLATION AND SAFETY The Myryad Z310 has been designed to offer a combination of high quality sound reproduction and elegant styling in keeping with othe
SETTING UP YOUR CD PLAYER BT ANT www.myryad.co.uk XLR R OFF DESIGNED IN ENGLAND BY MYRYAD SYSTEMS LTD MADE IN CHINA USB DAC L OPTICAL ON POWER COAXIAL POWER RATING 15W 230V 50/60Hz RCA ANALOG OUTPUT DIGITAL INPUT 9 8 7 6 5 USE ONLY WITH A 250V FUSE S/N DIGITAL OUTPUT FUSE: T1AL /250V 4 3 2 1 REAR PANEL CONNECTIONS 5. Optical output This is a serial electrical digital output to the “SPDIF” standard.
OPERATING YOUR CD PLAYER SKIP/SCAN 310 PHONES 4 2 1 3 5 6 7 8 9 FRONT PANEL CONTROLS 1. Standby When the player is plugged into a live wall socket and the POWER switch is turned ON, it will power up in “standby” mode and the LED (Light Emitting Diode) in the display will glow red. In this mode only a small part of the internal circuitry of the Z310 is powered up, so it consumes very little power and its inputs and outputs are isolated by relays. 6.
The SCAN function is used to select a specific passage within a music track. While a disc is playing, pressing SKIP/SCAN or and holding it down continuously will cause the laser to scan rapidly forward (or backward) through the music. Snatches of music will be heard through the loudspeakers at a reduced volume level. If the SKIP/SCAN key is held down longer the player will scan faster, but there will be no sound from the loudspeakers.
REMOTE CONTROL MUTE DIMMER DIMMER TUNING Screen On/Off MEM Scan back Random play Scan forward PRESET FREQ Skip back to previous chapter Repeat Chapter/Title/Disc Skip forward to next chapter Stop BAND ENTER Play/Pause MENU Digit keys 0-9 for direct track/chapter access Navigate and select from 0-9 OK SOURCE Device mode shift button (placing at CD/NWP position) Confirms/Selects item.
CARE AND HANDLING OF COMPACT DISCS • Discs should be returned to their case after use to avoid serious scratches that could cause the laser pickup to skip. • Do not expose discs to direct sunlight, high humidity or high temperatures for extended periods. Long exposure to high temperatures can warp the disc. • Do not stick paper or write anything with a ball-point pen on the disc surface. • Fingerprints and dust should be carefully wiped off the disc’s signal surface (shiny side) with a soft cloth.
www.myryad.co.uk Myryad Systems Ltd. Our policy is one of continuous product improvement, we reserve the right to change the designs and specifications without notice. All information is given in good faith. The manufacturer accepts no responsibility for errors, omissions or incorrect assumptions. This symbol means do not dispose of as municipal waste. Re-use or recycle wherever possible. Electrical/Electronic Equipment may contain substances harmful to the environment.
