Specification

S
u
b
m
i
tt
a
l D
a
t
a
Quality certificates
Standard Connections:
1/2" copper tube for supply and return.
Maximum positive operating pressure: 145 psi
Maximum operating temperature: 200° F
Myson Inc./Rettig USA 45 Krupp Drive, P.O. Box 1460, Williston, VT 05495 www.mysoncomfort.com
PROJECT NAME:
ENGINEER:
APPROVED DATE:
APPROVED
ARCHITECT:
SUBMITTED DATE:
HI-LINE SURFACE MOUNT
FAN CONVECTOR
ISO 9002
L
I
S
T
E
D
Electrical Specifications:
120 Vac 60 Hz
General
Provide MYSON HI-LINE hydronic surface mount wall fan convector in size(s) as scheduled. MYSON HI-LINE hydronic
surface mount wall fan convectors are ETL approved. HI-LINE fan convectors are approved for installation on "open"
potable water systems in compliance with and tested to NSF/ANSI 61, 372, CA/VT AB1953 and US Public Law No.
111-381 "Reduction of Lead in Drinking Water Act".
Each HI-LINE hydronic surface mount wall fan convector is engineered for quiet efficiency. The chassis is manufactured
from zinc-coated painted steel. Fan assemblies have ball bearings for longer life and extremely low noise levels and
the copper core heat exchanger is designed for fast heat transfer.
Each HI-LINE fan convector is supplied with an infrared remote control. The HI-LINE can be operated in automatic or
manual mode. In automatic mode, the desired room temperature is programmed into the unit and fan speed is
automatically adjusted until temperature is achieved. In manual mode, any one of the 3 fan speeds can be selected.
The water temperature sensor brings the fan on at 90°F. in heating mode and 59°F. in cooling mode. This insures that
the fan will only operate when there is sufficient hot of cold water in the heat exchanger to prevent the fan from
blowing cold air in the heating mode or warm air in the cooling mode. Fan speed and room temperature may be
adjusted with the remote control. Every unit is factory tested to insure the finest quality product with specified
confirmed temperature output.
Available Finish
White
Warranty:
Heat Exchanger - 10 Years
Fan Assembly - 3 Years
All Other parts - 1 Year
10/3/1
10/3/1
MAR 2016