Instructions / Assembly

09
iVECTOR Heater/Cooler
8.0
8.0 Water Connection (continued...)
Ensure all water fittings are secure before filling the system.
Fill the system, open the valves fully and check pipe connections
for leaks and vent the heat exchanger.
Installations with chilled water will require provision for
condensate disposal in accordance with any local regulations.
A drain tray is fitted for condensate collection within the unit.
This should be connected to a
1
/2" drain pipe.
Alternatively a condensate disposal pump is available as an
accessory, e.g. for use on internal walls (see Accessories page).
Spiggot size
1
9
/32" O/D
Connecting tube
>1
9
/32" I/D
How to bleed/vent
Condensate drain connection
25278 iVector Installation Guide US 02/01/2013 09:25 Page 10