Specification
General
Provide MYSON CV or RCV steel panel radiators in models and sizes including accessories as scheduled. CV and RCV
RADIATORS are made of 18 gauge cold-rolled sheet steel, and in accordance with EN 442-1, with a stylish and robust fluting,
with ribs at 1
5
/
16
inch intervals.
RCV style radiators have an added flat front panel with slight horizontal ribbing at 2.6 inch intervals for architectual appeal.
The radiators are equipped with a removable top grille and two removable closed side panels. Each radiator is supplied with E-Z fit
wall mounting brackets, (there are no wall mounting lugs welded onto the back). A manual vent plug, two blind plugs and a pre-
installed thermostatic valve insert (M30 x 1.5 thread with manual cap) are included with each radiator. Optional pedastal mounting
stands are available.
F
inishes:
1.
Undercoat: cataphoretic, submersion in a KTL bath, conforming to DIN 55900 part 1, baked at 347° F;
2.
Finish coat: electrostatic powder coating, conforming to DIN 55900 part 2, baked at 374° F. (On request, and at a
supplementary charge, a range of RAL colors can be offered. RAL 9016 white is standard.)
CONTRACTOR SERIES BASEBOARD RADIATOR
S
u
b
m
i
tt
a
l
D
a
t
a
Quality certificates
Warranty:
MYSON radiators are covered by a
10 year warranty.
Standard Connections:
6 x internal thread G 1/2“ BSP, 2 on each side and 2
onthe bottom right (2"cc) or left (CV only is reversible)
for supply and return.
Maximum positive operating pressure: 145 psi
Maximum operating temperature: 230° F
Myson Inc./Rettig USA 45 Krupp Drive, P.O. Box 1460, Williston, VT 05495 www.mysoncomfort.com
Additional depths are available as special order
10
10
10
A variety of adapters, valves, and TRV actuators is
available and recommended from MYSON. For specific
applications see our valve literature. Pipe covers and
escutcheons are available.
The CV and RCV Series radiators are an advanced design giving high efficiency characteristics. The high outputs per unit surface
area for the radiator models have been achieved by ensuring excellent contact between the convector plates and both the water
channels and dividing metal of the radiator panels - see figure 1. The convector surface is spot-welded to the metal channels, but
also firmly locates into grooves on the water channels, thus ensuring high heat transfer rates.
figure
1
CV / RCV Type 22 Depth: 4 inches
double panel & two rows of convector plates plus side panels & top grille
CV / RCV Type 21 Depth: 2
3
/
4
inches
double panel & one row of convector plates plus side panels & top grille
Standard Height:
7
7
/
8
inches (Nominal)
14 Standard Lengths:
24 to 119 inches (Nominal)
"CV" series
"RCV" series
PROJECT NAME:
ENGINEER:
APPROVED DATE:
APPROVED
2"
1
3
/
16
"
ARCHITECT:
SUBMITTED DATE:
MAR 2016