Specifications

RadiatorT6Series
CenterConnections(cont)
Swapping the right-hand side built-in valve to the left-hand side is no problem at all at
any time.
Radiators are delivered with protective caps. After removing the protective cap
(pos. A) the following thermostat heads can be fitted directly to the built-in v
(pos. B): “RA 2000”, “RAW” by Danfoss, “VK” by Heimeier, “D” by Herz,
“thera DA” by MNG and “UNI XD” by Oventrop.
alve
he
Setting Information
• Bottom center connections must be used for
internal valve function.
• Remove Site Cap or Probe Element.
• Turn the Setting Ring counter-clockwise to t
desired presetting—the setting value (1, 2, …
7, N) must be positioned above the mark.
• Presetting can be selected in grades of 0.5
between 1 and 7. Presetting is released in the
setting “N”.
5