Specification

General
Provide MYSON T6 IVC steel panel radiators in models and sizes including accessories as scheduled. T6 IVC RADIATORS are
made of cold-rolled sheet steel, and in accordance with EN 442-1, with a stylish and robust fluting, with ribs at 1
9
/
16
inch intervals.
Each T6 IVC CENTER CONNECT RADIATOR is equipped with wall mounting lugs that are welded onto the back. The radiators are
equipped with a removable top grille and two removable closed side panels. Each radiator is supplied with mounting brackets, a
blind plug, drain plug, and a pivoting special vent plug. A pre-installed thermostatic valve insert is included with each radiator.
F
inishes:
1.
Undercoat: electrophoretic, using water-soluble paints, conforming to DIN 55900 part 1, baked at 374° F;
2.
Finish coat: electrostatic powder coating, conforming to DIN 55900 part 2. (On request, and at a supplementary charge,
a range of RAL colors can be offered. RAL 9016 white is standard.) This coat is baked at a temperature of 410° F.
T6 IVC SERIES RADIATOR
S
u
b
m
i
tt
a
l D
a
t
a
Quality certificates
Standard
Connections:
4 x internal thread G 1/2“ BSP
side 4 corners
2 x external thread G
3/4" bottom center
Maximum positive operating pressure: 145 psi
Maximum operating temperature: 230°
F
Myson Inc./Rettig USA 45 Krupp Drive, P.O. Box 1460, Williston, VT 05495 www.mysoncomfort.com

Additional sizes and models are available as special order
The T6 Series radiators are an advanced design giving high efficiency characteristics. The high outputs per unit surface area for the
radiator models have been achieved by ensuring excellent contact between the convector plates and both the water channels and
dividing metal of the radiator panels. (figure 1). The convector surface is spot-welded to the metal channels, but also firmly locates
into grooves on the water channels, thus ensuring high heat transfer rates. In addition, the internal T configuration supply
distribution insures an efficient top to bottom water flow for rapid demand response. (figure 2)
figure 1
double panel & two rows of convector plates plus side panels & top grille
Standard Heights:
12, 16, 20, & 24 inches (Nominal)
Standard Lengths:
16 to 79 inches (Nominal)
N
figure 2
Warranty:
MYSON radiators are covered by a
10 year warranty.
10
10
10
A variety of adapters, valves, and TRV actuators is
availab le and recommended from MYSON. For specific
applications see our valve literature. Pipe covers and
escutcheons are available.
APPROVED DATE:
APPROVED
PROJECT NAME:
ARCHITECT:
ENGINEER:
SUBMITTED DATE:
T621 IVC Depth:
3
1
/
8
inches
double panel & one row of convector plates plus side panels & top grille
T622 IVC Depth: 4
1
/
8
inches
MAR 2016