Specification

General

MYSON GEM series towel warmers are constructed of superior grade stainless steel, available in a polished or a matte finish.

All models utilize a dry element resistance cable that is woven through the entire interior of the towel warmers during the

assembly process. The wattage of each element is specifically matched to the model and size of each unit to provide a

consistant, even surface temperature over the entire unit. All factory joints are spot welded to insure durability and stability

though years of use. Each unit is controlled by a lighted on/off rocker switch located at the top of the right side vertical bar.

All GEM towel warmers are 120V 60Hz and have a heavy duty, white, integral power cord that extends up to 4 feet. Every

unit is supplied with a wall mounting kit complete with all hardware required for installation.

An optional Hard Wire Kit is available for all models.

inishes:

All models are available in either a bright polished or a brushed matte finish.

GEM SERIES TOWEL WARMERS

Quality certificates

Warranty:

MYSON GEM Series towel warmers

are backed by a 2 year warranty.

PEARL:

The PEARL Model is available in 2 wall mount sizes and 1 portable, free standing style.

PEARL models are 24 inches wide with heights of 30 and 36 inches. Each is constructed of high quality 201

stainless steel

with round horizontal and vertical bars.

Myson Inc./Rettig USA 45 Krupp Drive, P.O. Box 1460, Williston, VT 05495 www.mysoncomfort.com

MYSON GEM series towel warmers are available three distinct models in several sizes to fit every design criteria.

DISTRIBUTED BY:

DIAMOND:

The DIAMOND Model is available in 3 wall mount sizes.

PEARL models are 20 inches wide with heights of 16

, 30 and 45 inches and are constructed of high quality 304 stainless

steel with ovalesque horizontal and vertical bars.

RUBY:

The RUBY Model is available in 2 wall mount sizes.

RUBY models are 23

inches wide with heights of 15

and 46 inches. Each is constructed of high quality 201 stainless

steel with square horizontal and vertical bars.

Approval:

All MYSON GEM Series towel

warmers are ETL cerififed.

FPRL08

WPRL08

WPRL10

WDIA08

WDIA10

WRBY10

9FEB2016

PAGE 1
GEM SERIES TOWEL WARMERS Gener a l MYSON GEM series towel warmers are constructed of superior grade stainless steel, available in a polished or a matte finish. All models utilize a dry element resistance cable that is woven through the entire interior of the towel warmers during the assembly process. The wattage of each element is specifically matched to the model and size of each unit to provide a consistant, even surface temperature over the entire unit.
PAGE 2
Specification Data GEM SERIES TOWEL WARMERS PEARL, DI AMO N D a n d R U B Y mod e l s 24" 24" 24" 4.375" 4.375" 3.15" 3.15" 6.30" 35.125" 30" 6.30" 36.625" Cord extends up to 4' 3" TYP *Cord extends up to 4' 14.875" . . . . . . 120VAC 60Hz 110W . 201 Stainless Steel . Vertical 1-1/4" Diameter . Horizontal 3/4" Diameter . Heavy - Duty Cord . Portable 3" TYP 120VAC 60Hz 110W 201 Stainless Steel Vertical 1-1/4" Diameter Horizontal 3/4" Diameter Heavy - Duty Cord . . . . .