Specifications

13
Topside Control Panel
Your spa control has been specifically designed so that by simply connecting the spa to a properly
grounded source, and following the start-up procedures in this manual, the spa will automatically
heat to the set temperature. Many other functions, such as filtration, safety checks and maintenance
reminders have been automated so that your spa experience will be as carefree as possible.
But you’re in charge! The topside control (TSC) panel allows you to set the temperature, initiate the
filtration cycle, control the lights, and activate or deactivate the pump(s) and blower. The TSC display
responds to let you know you have pressed a button, and that the selected function has
been performed.
Power-Up Detection
After a power-up, on the first 10 seconds the display will alternate between the software number and
revision, the display will then blink until somebody presses a key. This feature lets you know that a
power failure has occurred and all settings have returned to default.
Pump 1
Pump 2
Therapy Air
Light Control
Display Panel
Pump 3
Filter
Cycle
Up
Arrow
Down
Arrow
Function Indicator Section
A small inverted triangle over the symbol indicates that the corre-
sponding function is active.
Pump 1
Pump 2
Pump 3
Light Control
Display Panel
Pump 4 Pump 5
Up
Arrow
Down
Arrow
Function Indicator Section
A small inverted triangle over the
symbol indicates that the correspond-
ing function is active.