Specifications

18
Care of the Spa Cover
WARNING: The cover is a manual safety cover that meets or exceeds all prevailing requirements of
ASTM Standards for spa safety covers when installed and used correctly as of the date of manufacture.
Non-secured or improperly secured covers are a hazard. Open the cover to its fully open position before
use. Be sure to inspect the cover for premature wear or deterioration. Over time, with use, there is a
chance of normal cover wear and deterioration. To properly maintain your cover see directions below.
Vinyl Cover
The vinyl spa cover is an attractive, durable foam insulation product. Monthly cleaning and
conditioning is recommended to maintain its beauty.
To clean and condition the vinyl cover:
1. Remove the cover from the spa and gently lean it against a wall or fence.
2. With a garden hose, spray the cover to loosen and rinse away dirt or debris.
3. Using a large sponge and/or a soft bristle brush, and using a very mild soap solution or baking
soda, scrub the vinyl top in a circular motion. Do not let the vinyl dry with a soap film on it
before it can be rinsed clean.
4. Scrub the cover’s perimeter and side flaps. Rinse clean with water.
5. Rinse off the underside of the cover with water only (use no soap), and wipe it clean with a dry
rag.
6. To condition the cover after cleaning, apply a thin film of Arctic Pure
®
Cover Renew to the
vinyl surface and buff.
Care of the Spa Cabinet
Cedar Cabinet: When properly cared for, the wood cabinet of your spa will maintain its beauty for
many years. Your Arctic Spa cabinet has been specially treated with Olympic Maximum Wood Stain.
Use this stain or a similar product on a regular basis to protect the wood of the cabinet and keep your
spa looking great for years to come.
Forever Flex
TM
Cabinet: Wash with soap and water. (no harsh chemicals)
MANUAL SAFETY COVER