User's Manual

MYSPHERA • Ronda Auguste y Louis Lumiere 23, Nave 13 • 46980 Parque
Tecnológico de Valencia • Paterna, Valencia • Spain
Telf.: [phone] • [e-mail] • www.mysphera.com
Pág. 6
- Product identifier code:
o Start with 3 letters indicating type / family of the product.
o Followed by 2 letters indicating the type of interface and / or communication
of the product.
o Followed by 1 digit indicating version of the enclosures / enclosures /
mechanical encapsulation.
o Followed by 2 digits indicating the hardware version.
o Finishing with 2 digits that indicate the firmware version.
- IEEE adress: 12-digit alphanumeric MAC identification, unique for each device /
product manufactured.
- S / N: Serial number of the hardware used in that product.
o Internal product accounting code.
o Hardware manufacturing number.
- Electrical characteristics of use.
- Certification and marking symbols: CE and FCC
- Place and year of manufacture.
3. Instalation
The USB Gateway is a device with USB power. You will need the USB cable type A-B
provided in the same box to connect it to the computer.
To start using your USB Gateway, connect the USB cable to the bottom of the Gateway, as
shown in the figure, allowing the cable to exit through the side hole. Connect the other end
of the cable to any port of a USB Hub. The device will be detected by your operating system
and will be installed automatically, being ready for use. The blue indicator light indicates
that the device has been correctly installed.
Ilustration 2 – USB cable connection
To disconnect the Wireless Gateway simply disconnect the USB cable.