Instructions for 7000DX Flood Hog™ Please read before use. Register your product at www.mytee.com/help Model # Set up p. 2 Parts & Pricing p. 6 Wiring diagram p. 8 General information p.9 Notes p.12 Serial # Form # ADM-7000DX 5-12 13655 Stowe Dr., Poway, Ca.
7000DX FLOOD HOG 7000DX FRONT 7000DX BACK 1 2 13 7 8 6 5 3 9 10 4 1. Handle 2. Recovery Tank Lid 3. Operating Controls 4. Lift Handle 5. EZ Open Service Latches 6. Vacuum Hose Hook-up 7. On Board Filter 8. Auto Pump Out Fitting 9. Drain Valve 10. 25’ Power Cord 11. 10” Stair Climbing Wheels 12. Swivel Locking Casters 13. Chemical Storage 7000DX ACCESSORIES H908 - 2 Piece Aluminum Wand Tube P570 - Scalloped Vacuum Head H294 - 1.
7000DX FLOOD HOG 7000DX FRONT VACUUM/DEBRIS FILTER HOSE HOOK UP 7000DX BACK VACUUM HOSE/AUTO PUMP-OUT HOOK UP Attach the second hose bearing cam lock to the Auto Pump-out fitting. Secure the hose to the fitting using the cam lock. Push the hose cuff onto the fitting, making sure the silver ears and rings are extended forward. Pull the ears down using the rings until connection is tight. Place the end of the hose in a location where dirty water can drain. Attach the hose with the 1.
7000DX FLOOD HOG 7000DX WATER LEVEL CONTROL SWITCHES Vacuum stack filter 7000DX DRAIN VALVE AND SPOUT Vacuum water level control switch Pump-out water level control switch As the water level reaches the pump-out water level control switch, the pump is activated. Once the water level reaches the vacuum water level control switch, the vaccum shuts off preventing the water from going into the vacuum stack, damaging the vacuum motors. At the top of the vaccum stack, there is a filter. Clean it weekly.
7000DX FLOOD HOG 7000DX DEBRIS FILTER 7000DX LATCHES AND LIFT HANDLE LATCHES: Detach: Flip-up latch. Twist counter clockwise for release. The filter protects the vacuum motor from damaging debris. Keep it clean by removing vacuum hose and turning lid counter-clockwise to open. Remove stainless steel basket and gently rinse with water. Dry with a soft cloth. Replace basket, lid and hose. Attach: Place latch. Twist clockwise Press latch to secure. LIFT HANDLE: Use lift handle to prevent damage to unit.
A B C D E F 8 H220 24 25 P561 G031 H359 P563 H972 G075 G002 P684 37 38 39 40 41 42 43 44 8 washer, 1/4" flat, s/s H135 36 Part prices are subject to change. 7 gasket, vacuum, ml II gasket, cam fitting polyethylene, 2.35" OD 1.90" ID adaptor, pvc 2, fmsl x fmt strap, leaf trap, flood hog filter, body, inline, w/2" npt basket, strainer, 4.5 DIA x 12.5 gasket, 3.25" i.d. x 5.88" o.d.
A B C D E F 36 8 8 37 7 21 38 5 6 7 1 3 3 79 20 39 28 7 2 4 14 13 17 18 19 15 34 6 40 6 6 41 33 12 23 80 22 9 24 42 67 11 6 81 8 25 51 43 44 45 46 5 66 29 26 5 30 8 5 76 77 4 78 31 59 20 48 4 32 4 54 58 57 27 3 25 51 3 64 60 62 53 63 50 51 52 65 D. Cano NAME 74 58 61 DATE 3/29/12 2 SCALE: 1:6 1 DO NOT SCALE DRAWING 7000DX SIZE DWG. NO. C B SHEET 2 OF 2 REV PRODUCTS, INC.
7000DX & 7000DX-230 FLOOD HOG WIRING DIAGRAM 8
GENERAL INFORMATION Dear Customer: Unpacking the Machine Keep in mind that the 7000DX Flood Hog™ is a machine, so neglect or abuse will cause unnecessary damage and void the warranty. However with simple maintenance the 7000DX will give quality performance for many years to come. Caution and Warnings When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton so that it can be inspected by the carrier that delivered it.
GENERAL INFORMATION moisture in the vacs to dry off. where dirty water can drain. 4. 7000DX model - Two power cords are located in the back of the machine. To power Vacuum 1 and Pump, plug in the top cord. To power the Vacuum 2, plug in the bottom cord. Plug each of the two power cords into two separate, 20A grounded wall outlets. Do not use extension cords. 5. 7000DX model - Three switches are located on the lower left side of the machine. To use the vacuum 1, turn on the Vacuum 1 switch.
GENERAL INFORMATION required by law, or, if there are legal limitations of exclusion of remedies, the exclusions made herein shall be construed to apply to the fullest extent possible without violating the law. The validity, construction and performance of this warranty policy shall be governed by the laws of the State of California, without respect to conflicts of laws principles.
NOTES Mytee Products Inc. 13655 Stowe Dr. Poway, Ca. 92064 www.mytee.com PH 858.679.1191 F X 858.679.7814 © 2012 Mytee Products Inc. Printed in the U.S.A.
