User manual

9
6. Front cooling fan
7. Bottom handle
8. 5” locking casters
9. Solution tank
10. Recovery lid
1. Switch plate
2. 2” Male Cuff-Lynx™
3. Solution lid
4. Female quick disconnect (QD)
5. Front handle
11. Recovery tank
12. Push handle
13. Drain valve
14. Dual power cords
15. Back vent
16. 12” Rear wheels
3
7
1
8
10
5
4
2
6
9
1001DX & 1001DX-200 SPEEDSTER
®
BACK1001DX & 1001DX-200 SPEEDSTER
®
FRONT
1001DX & 1001DX-200 SPEEDSTER
®
ITEMS INCLUDED
H375- Hose Hanger H226 Drain Elbow
(4) screws
H110 Cuff-Lynx™ H141 Cuff-Lynx™
2” Hose Adapter 2” Hose Reducer to 1.5”
1001DX & 1001DX-200 SPEEDSTER
®
CORDS
Plug each power cord into a separate, 20A grounded wall outlet.
Outlets must be on two separate breakers. When the amber
light on the switch plate illuminates, the machine is on separate
circuits (not necessarily 20A circuits). You can identify the primary
cord by the yellow tag.
Left cord: Powers Vac 2 & Heater 2.
Right cord: Powers Vac 1, Heater 1 & Pump.
1001DX & 1001DX
-
200 SPEEDSTER
12
14
11
13
15
16
Yellow tag
indicates primary
cord.