Operating instructions

MYTEE

SYSTEM MAINTAINER

Weekly ushing of the solution system with Mytee System Main-

tainer helps keep lines clean and prevents chemical build-up,

improving pump life, performance, and pressure.

SPEEDSTER

LTD12 SOLUTION TANK

DRAIN VALVE

To remove any remaining water in the solution tank, located on

the back of the unit is a cap, twist and remove cap to

empty tank.

TIGHTEN

LOOSEN

SPEEDSTER® LTD12

SPEEDSTER

LTD12

FILTER MAINTENANCE

The LTD’s ve internal lters must be cleaned regularly and are

located in the locations listed in the following diagram. Twist the

lters to remove them then clean and replace in original locations.

If a lter is torn or damaged, replace with a new one.

INTAKE

FILTER

REGULATOR

BY PASS FILTER

PUMP OUT

FILTER

VACUUM

STACK

FILTERS

(2)

SPEEDSTER

LTD12 TANK LATCHES

& PUMP HOUR METER

The rear latches can be unlatched from the lower half of the

unit to open it for internal repairs and cleaning. To unlatch, ip

and twist latches. The hour meter activates when the pump

is turned on. This helps monitor usage and when to make oil

changes. Refer to p. 24 for oil maintenance instructions.