Operating instructions

2
SPEEDSTER
®
LTD3 BACKSPEEDSTER
®
LTD3 FRONT
SPEEDSTER
®
LTD3 CORD
SPEEDSTER
®
LTD3 ITEMS INCLUDED
H375-Hose Hanger H226 Drain Elbow
(4) screws
H110 Cuff-Lynx™ H141 Cuff-Lynx™
2” x 2” Hose Adapter 2” x 1.5” Hose Reducer
FILTERS
G008 - Pack of Piglet™
lters
7. Front Fan
8. Side Vents
9. Solution Lid
10. PSI Gauge
11. Recovery Lid
12. Push Handle
1. Switch Plate
2. 2” Male Cuff-Lynx™ Inlet
3. Prime Value
4. Female Quick Disconnect (QD)
5. Front Handle
6. Pressure Regulator
13. Recovery Tank
14. Solution Tank
15. 4” Locking Casters
16. 10” foam lled
semi-pneumatic wheels
17. Hour Meter
18. Power Cords
19. Auto Fill/Pump Out
Hose Connections
20. Solution Tank Drain
21. Service Latches
22. Rear Vacuum Exhaust
Optional Mufer Port
23. Recovery Tank Drain Valve
3
1
10
5
4
2
6
9
12
14
11
13
15
16
18
19
20
21
(Primary) Right Cord: Plug in yellow-tagged power cable
for Power To Vac 1, Pump, & 600W Heater.
(Secondary) Left Cord: Plug in power cable for Vac 2,
Pump-Out & 1,000W Heater.
Plug each power cord into a separate, 20A grounded wall outlet.
Outlets must be on two separate breakers. When the amber
light on the switch plate illuminates and the audible tone sounds,
the machine is on separate circuits (not necessarily 20A circuits).
You can identify the primary cord by the yellow tag.
Yellow tag
indicates primary
cord.
SPEEDSTER® LTD3
7
8
22
17
23