Operating instructions

SPEEDSTER

LTD3 AUTO-FILL CONECTIONS

Using one end of a ½” garden hose, attach it to the mounted

connection behind the LTD unit, then attach the other end to the

desired faucet connection. Turn on the faucet water and let the

auto-ll begin to ll. It will shut off when the water level reaches

the LTD’s electronic oat switch.

SPEEDSTER

LTD3 RECOVERY DRAIN VALVE

Make sure the Auto-Fill is turned off and then locate and lift the

bucket high drain valve on the rear of the LTD unit to empty

the tank.

SPEEDSTER

LTD3 PUMP-OUT CONNETIONS

Using a separate ½” garden hose, attach one end to the LTD’s

mounted pump-out connection and lay the other end of the hose

in a drainable location. With the pump-out switch activated and

the valve parallel with its pipe, the unit will automatically drain

water from the ll tank while the auto-ll maintains water levels.

Make sure ball valve is open!

SPEEDSTER® LTD3

The LTD is equipped with an electronic oat switch inside the

recovery and solution tank. The recovery oat switch is activated

by rising water to prevent suction into the vacuum stacks damag-

ing the motors. The solution oat switch shuts off the auto-ll once

water lever reaches switch.

Electronic shut-off

switches prevents

water from getting

into the vacuum stack

& monitors water level

in solution tank.

VAC STACK

SPEEDSTER

LTD3

FLOAT SWITCHES