Operating instructions

9
SPEEDSTER
®
LTD5 ITEMS INCLUDED
H375-Hose Hanger H226 Drain Elbow
(4) screws
H110 Cuff-Lynx™ H141 Cuff-Lynx™
2” x 2” Hose Adapter 2” x 1.5” Hose Reducer
FILTERS
G008 - Pack of Piglet™
lters
SPEEDSTER
®
LTD5 FRONT
7. Front Handle
8. Solution Tank
9. Front Vent
10. 4” Locking Casters
11. Solution Lid
12. Recovery Lid
1. Switch Plate
2. PSI Gauge
3. 2” Male Cuff-Lynx™ Inlet
4. Pressure Regulator
5. Prime Value
6. Female Quick Disconnect
3
7
1
10
5
4
2
6
12
8
9
11
13. Push Handle
14. Recovery Tank
15. Recovery Tank Drain Valve
16. Rear Vacuum Exhaust
Optional Mufer Port
17. Service Latches
18. Power cords
19. Hour Meter
20.10” foam lled
semi-pneumatic wheels
21. Auto Fill Connection
22. Pump Out Hose Connection
23. Solution Tank Drain
24. Side vent
SPEEDSTER
®
LTD5 BACK
14
13
15
16
17
20
18
21
22
23
SPEEDSTER
®
LTD5 CORDS
Plug each power cord into a separate, 20A grounded wall outlet.
Outlets must be on two separate breakers. When the amber
light on the switch plate illuminates, the machine is on separate
circuits (not necessarily 20A circuits). You can identify the primary
cord by the yellow tag.
(Primary) Right Cord: Plug in yellow-tagged power cable
for Power To Vac 1, & Pump.
(Secondary) Left Cord: Plug in power cable for
Vac 2 and the Pump-Out.
Yellow tag
indicates primary
cord.
SPEEDSTER® LTD5
19
24