User manual

9
M-5 SWITCHES & PRESSURE GAUGE
Switches and Pressure Gauge are located on the plate in front of
the machine. The Amber light left of the Pressure Gauge will il-
luminate when cords are plugged into two separate circuits. To use
vacuums, turn on Vac 1 and Vac 2 switches. To use Pump, turn on
Pump switch. The Pressure Gauge displays the water pressure as
PSI. To use Pump-out feature, turn on Pump-out switch.
VAC 1
VAC 2
PUMP OUT
PUMP
M-5 VAC/SOL HOSE CONNECTIONS
M-5 AUTO-FILL & PUMP-OUT
AUTO-FILL
PUMP-OUT
M-5 FILL SOLUTION TANK
If not using the Auto-ll feature, lift the solution tank lid and manually ll
the tank.
If using Auto-ll and Pump-out, connect one end of a 1/2 inch
garden hose to the top hose inlet in back of the machine, the other
end to a faucet. Add water pressure by turning on faucet. Attach a
second 1/2 inch garden hose to the bottom hose inlet, and place
the other end in a location where dirty water can drain.
Before turning on switches, connect hoses to the extractor and a
wand or tool. Attach a solution hose to the front QD, the other end
to the tool. Attach a vacuum hose to the tool, the other to the front
Cuff-Lynx™ vacuum hose port. Just twist into place.
M
-
5 M-SERIES™