Instructions for S-300 Tempo ™ Please read before use. Register your product at http://www.mytee. com/support/register Model # Set up p. 2 How to p. 4 General information p.14 Serial # Form # ADM-Tempo 1-14 13655 Stowe Dr., Poway, Ca.
S-300 TEMPO™ FRONT BACK 1 6 7 2 5 8 4 9 3 1. Handle 2. Solution Tank Lid 3. 3” Wheels 4. Solution Tank 11 10 7. Vacuum Hose Hook Up 8. Recovery Tank Drain Cap 9. Quick Disconnect 10. Power Switch 5. Recovery Tank 6. Recovery Tank Lid 11. 25’ Power Cord VACUUM AND SOLUTION HOSE CONNECTION ACCESSORY 8’ vacuum and solution hose combo. Located at the back of the Tempo™, attach the male end of the solution hose to the Tempo’s™ QD. Then connect the vacuum hose to the Tempo’s™ hose port.
S-300 TEMPO™ FILL SOLUTION TANK POWER SWITCH Plug machine’s cord into a grounded wall outlet then switch power on. FOR SAFETY: Do not operate machine unless cord is properly grounded. Twist off solution tank lid and fill with water. For best results, fill with warm water (140o F). EMPTY RECOVERY TANK To empty the recovery tank, remove cap located above the quick disconnect to releases fluid.
S-300 TEMPO™ FILTER DEFOAMER Add defoamer in the recovery tank to reduce foam and prolonging the life of the Tempo’s™ vacuum motor . To get the best performance out of the Tempo™, after each job, twist off the recovery tank lid and clean off the filter located on the vacuum stack. SYSTEM MAINTAINER Weekly flushing of the solution system with Mytee System Maintainer helps keep lines clean and prevents chemical buildup, improving pump life, performance and pressure.
Order parts at: www.mytee.com/products/product.php?id=8901 6 A B C D E F H213 H342 B119 B109 PH634-8 20 21 22 24 24 H645 PH610-2.
A B C D E F 8 8 7 7 29 35 34 18 36 34 34 21 20 19 17 16 34 34 6 33 6 32 4 31 30 3 11 8 29 21 20 19 12 2 7 8 28 8 1 8 29 19 9 5 5 27 26 10 26 11 5 25 22 12 6 24 13 24 4 Inside sol tank 15 14 4 44 39 3 3 42 41 1 43 40 NAME DATE 4/5/11 2 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MYTEE PRODUCTS, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF MYTEE PRODUCTS, INC. IS PROHIBITED.
GENERAL INFORMATION Dear Customer: Unpacking the Machine Keep in mind that the S-300 Tempo™ is a machine, so neglect or abuse will cause unnecessary damage and void the warranty. However with simple maintenance the S-300 will give quality performance for many years to come. Caution and Warnings Congratulations on the purchase of your new Tempo™ spotter. As you are already aware, the scene of the equipment world is becoming more high tech, and we at Mytee Products Inc.
GENERAL INFORMATION Setup Maintenance Schedule 1. Fill solution tank with water or approved cleaning agent. For best results, fill with warm water (140o). Replace vacuum tank. Flammable materials can cause an explosion or fire. Do not use flammable solutions or materials in tank(s). FOR SAFETY: When using machine, follow mixing and handling instructions on chemical containers. ATTENTION: If using powdered cleaning chemicals, mix prior to adding.
GENERAL INFORMATION shipping or labor costs. form for evaluation at the customer’s expense. This shipping is non-refundable. All warranty claims are subject to an evaluation by Mytee Products, Inc. to determine if warranty will be approved. Any credit for repair and/or parts will only be issued upon evaluation and approval from Mytee Products, Inc.
NOTES 11
NOTES Mytee Products Inc. 13655 Stowe Dr. Poway, CA 92064 www.mytee.com © 2014 Mytee Products Inc. Printed in the U.S.A.
