Instruction Manual

Mytek DIO MADI Card – User Manual

Introduction

The Mytek DIO MADI Card is a physical card that

plugs into the back of the Mytek 8X192 ADDA

converter.

With this card installed the Mytek 8X192 ADDA can

directly interface with other MADI capable

equipment. The card can be installed by the user as

described further in the manual.

Before You Begin

Before connecting the DIO MADI card, check if the

most current firmware (version 4.5.5 or later) is

installed in the 8X192 converter. To verify your

current version locate the firmware chip on the main

converter board or contact Mytek via email and

provide the serial number of converter.

(If necessary contact Mytek and request appropriate

firmware.)