User Manual

Mytek Protools-HD DIO Card – User Manual
Input Connection
The Protools DIO-HD card features two connectors: Primary
Port and Expansion Port. Functionality of these connectors is
identical to Pro Tools system. Up to 8 8X192 ADDA Mytek
Digital converters can be daisy chained or mixed with
Digidesign HD-192 and other brands that emulate an HD-192.
Output connectors on the back of Ptools-HD-DIO card.
Protools computer interface card should always be connected to
the Primary Port in the Master device, which operates as a clock
signal source. Then, Expansion Port can be connected with
Primary Port of a different Slave device. Devices are visible in
Setup > Hardware Setup menu of the Pro Tools application.
Setup > Hardware Setup
User Manual ver. 1.1 / oct 2010 www.mytekdigital.com Page: 14 / 29