User Manual
Mytek Protools-HD DIO Card – User Manual
12. Use SOURCE TO DIGITAL OUT and SOURCE TO
ANALOG OUT buttons to set desired signal flow in the
system.
✔ Use SOURCE TO DIGITAL OUT button to select
which audio signals are sent from the 8X192 ADDA
converter to the Pro Tools system and converter’s
digital outputs.
✔ Choose the signal transmitted to converter’s analog
output by pressing SOURCE TO ANALOG OUT
button.
13. In Setup > I/O Setup configure the routing according to
your needs, keeping in mind that 8X192 ADDA
converter has eight channels.
Setup > I/O Setup
User Manual ver. 1.1 / oct 2010 www.mytekdigital.com Page: 24 / 29