User Manual

Mytek Protools-HD DIO Card – User Manual
Software update
WARNING!
Remember to follow basic safety rules about the handling of
electronic devices while opening the converter:
✔ keep your hands dry,
✔ remember to turn off power and disconnect power
and signal cables while working with the top cover
removed.
To perform firmware update of 8X192 ADDA converter:
1. Check if the power cord and signal and clock lines are
disconnected.
2. Remove the top cover.
User Manual ver. 1.1 / oct 2010 www.mytekdigital.com Page: 26 / 29