Software (v.2)

10. CLICK OK inside the Bitstreaming Formats dialog and OK in the Options dialog

11. You are now configured to stream DSD files Natively to the MYTEK Stereo192-DSD

DAC , (Once DSD streaming is active the front panel of the MYTEK will read DSD)

JRiver Multichannel Setup with 3x Stereo192-DSD DACs

Jriver on Win can play both sacd.iso as well as multichannel DSD and PCM files.

1. Please make sure all 3x Mytek Stereo192-DSD DACs are loaded with newest software;

a. Firmware: 1.7.5 or later.

Menu - Firmware, press a knob

b. USB drivers: 1.34.10 or later.

Check under Driver Info Tab in STEREO192-DSD Control Panel (located in

System Tray, PAL icon).

You can download the newest software from http://mytekdigital.com/hifi

2. Connect all 3 DACs via USB 2.0 to USB hub.

3. Connect all 3 DACs via 2x BNC WordClock cables:

a. 1

DAC's WCK OUT into 2

DAC's WCK IN

b. 2

DAC's WCK OUT into 3

DAC's WCK IN

4. Set the 1

DAC to Internal Sync so it is the Clock Master.

Menu - Input - USB2 - Int Sync.