Owner's manual

T1 Amp 20mm

Slow Blow fuse

115VAC/230VAC

power switch

Internal input gain trimpots:

Overall L/R signal gain- turn it down for unbalanced consumer -10dBV

sources- use sinewave alignment procedure described further if necessary.

Default is typical +4dB output level.

Internal analog output jumpers:

JP2, JP4 - insert front stereo potentiometer as the output XLR volume control-

default- used typically when power amp or powered speakers are connected to

output. Turn it down for unbalanced consumer -10dBV sources.

JP1, JP3 - overall signal gain- turn it down for unbalanced consumer -10dBV

sources- use sinewave alignment procedure described further if necessary.

Stereo96DAC internal trimpots and jumper assignments

(remove top cover to access)

Stereo96DAC internal trimpots and jumper assignments

(remove top cover to access)