User manual

Mytek Ptools-HD DIO Card – User Manual
Input Connection
Ptools DIO-HD card features two connectors: Primary Port and
Expansion Port. Functionality of these connectors is identical to
Pro Tools system. Up to 8 pcs of 8X192 ADDA Mytek Digital
converters can be daisychained or mixed with Digidesign HD-
192 and other brands that work in 192-HD emulation mode.
Output connectors on the back of Ptools-HD-DIO card.
Protools computer interface card should be always connected to
the Primary Port in the Master device, which operates as a clock
signal source. Then, Expansion Port can be connected with
Primary Port of a different Slave device. Devices are visible in
Setup > Hardware Setup menu of the Pro Tools application.
Setup > Hardware Setup
User Manual ver. 1.0 / jan 2007 www.mytekdigital.com Page: 14 / 29